2495: Universal Seat Belt
|Universal Seat Belt|
Title text: The plug fits really snugly, so it should be safe in a crash.
| This explanation may be incomplete or incorrect: Created by a QUICK-RELEASE SERIAL CONNECTION THAT CAN WITHSTAND A SUDDEN KERNEL PANIC AT 80MPH BUT FAILS IF TOUCHED. Please mention here why this explanation isn't complete. Do NOT delete this tag too soon.|
If you can address this issue, please edit the page! Thanks.
This became the second installment in the new series of Cursed Connectors and presents Cursed Connectors #65: The Universal Seat Belt. The series began two comics earlier with 2493: Dual USB-C (#187).
USB connectors are mostly designed for free and unrestricted insertion and removal. There may be a slight use of the internal and external bumps and dimples to provide a tactile indication of being engaged or disengaged, but there are usually no facilities to prevent a connector being easily pulled out of even a port being actively used - the OS can do no more than complain that a device has been removed without first ensuring proper logical unmapping of the resource (which in turn may have to await a current session of data transfer being completed or aborted) or warn that a "delayed write" has failed. Anyone who has used USB in a frequently-jostled environment knows the connectors can't withstand much jerking around without their connection to their mainboard permanently failing.
Car seat-buckles, on the other hand, have very definite requirements to not come loose unless intentionally and mechanically released, in order to keep the passenger safely anchored to the seat.
The title text claims that the seat belt is secure in the case of a crash. This is another pun, as seat belts protect passengers in a car crash while USB standard is designed to protect the computer in the event of a device hardware malfunction.
Another similarity between seat-belts (especially on back seats) and USB-plugs is that they can be a bit fiddly to insert. A seat-belt lock with the asymmetric design of a USB-A plug would be even more fiddly and thus "cursed".
One possible use for the USB data connector might be to give a certain degree of 'proof' that the belt is plugged in, although that functionality is fairly well covered by current anchor-point sensors that (combined with seat-occupancy sensors that may respond to the weight of a seated person) can trigger dashboard lights and possibly warning sounds in vehicles as necessary to prompt correct usage of restraining belts. That system does not usually need an electronic data connection between anchor and belt, an anchor-side switch should suffice, and it would still require a mechanical gripping/hooking method to make it of any use to be engaged in the first place.
The USB specification is designed such that USB connectors fit snugly from pressure. This means they usually need no button, like seatbelts have, to lock them in place. If one hacks a USB connection to increase the tightness, so that it can withstand more force applied to it and still hold its function, it becomes much harder, or even impossible, to insert and remove. Randall has removed the button, such that the connectors are a "cursed" misleading and dangerous use of similar form.
- [The two ends of a seatbelt are shown next to each other, but the seatbelt connectors are replaced with a USB-A plug and port. Above is a title and below is a label.]
- Cursed Connectors #65
- the Universal Seat Belt
add a comment! ⋅ add a topic (use sparingly)! ⋅ refresh comments!