| Latest revision |
Your text |
| Line 8: |
Line 8: |
| | | | |
| | ==Explanation== | | ==Explanation== |
| − | This is the fifth installment in the series of [[:Category:Cursed Connectors|Cursed Connectors]] and presents Cursed Connectors #78: The Outlet Denier.
| + | {{incomplete|Created by an OUTLET IN DENIAL - Please change this comment when editing this page. Do NOT delete this tag too soon.}} |
| | | | |
| − | The outlet denier connector in this comic is the large connector to the right. It has a plug on the downward side that is supposed to go into a {{w|power strip}} or other type of outlet. It has two long bars extending up and down off the plug, as well as a D shape on one side with another, slightly less long bar on the other side of the D, that has the cord connected to it. The purpose of the outlet denier is to block access to as many other ports on a power strip as possible, hence the name. It is designed to work with many different types of power strips, such as the standard one displayed in the comic, as well as ones with the sockets rotated 90 degrees (the long bar extending to the cord) and other types of outlets like the triple outlet on the end of many extension cords and two dimensional power strips that extend a couple of outlets left and right as well as up and down (the D shape on the side). The extreme bars to each side may also prevent plugging the Denier into an outlet close to the floor, forcing the user to use a power strip or similar item for it.
| + | This is the fifth installment in the series of [[:Category:Cursed Connectors|Cursed Connectors]] and depicts a plug that covers a whole power bar. |
| | | | |
| − | There is an example power strip displayed to the left of the outlet denier, used to help explain that the outlet denier is designed to block as many other sockets on a power strip as possible. The power strip is presumably of the type with a {{w|Light_switch#Rocker|rocker switch}} that can turn the entire power bar off. This power bar has five outlets.
| + | Many appliances require transformers or other large components on their power cord. Sometimes these "power bricks" are built around the plug, and these may block access to other sockets on a power strip or wall outlet. Other plugs are deliberately designed to block the other half of a duplex outlet, preventing users from plugging anything else in that could overload the circuit. The comic depicts an extreme case of a cumbersome connector shape designed to block an entire power strip. |
| | | | |
| − | Many appliances require transformers or other large components on their power cord. Sometimes these "power bricks" are built around the plug. The comic is making fun of these types of power bricks, as they often block access to other sockets on a power strip or wall outlet. This can be really annoying when you want to plug in many different appliances into a power strip. | + | Many (most?) power strips have a rocker-style power switch at one end, that can be used to turn on and off all the outlets. The title text says that this connector has bumps that match up with that location no matter which outlet of the strip it is plugged into. It's not clear whether this will turn the power switch off or force it always on. But either way, it gets in the way of the user being able to control the power themselves. |
| | | | |
| − | Other plugs are deliberately designed to block the other half of a duplex outlet, preventing users from plugging anything else in that could overload the circuit.{{actual citation needed}} The comic could be depicting an extreme case of a cumbersome connector shape designed to block an entire power strip, as the appliance connected to it uses so much power that a single extra item plugged into the power strip would cause problems.
| + | Besides, many outlets are around a foot from the ground. It appears that this plug is so large that it cannot attach to any of these outlets, as the bottom part would run into the floor. |
| | | | |
| − | The title text says that the outlet denier has bumps on the underside of the long bar that would match up with the location of the rocker switch no matter which outlet of the strip it is plugged into. It's not clear whether this will turn the power switch off or force it always on. But either way, it gets in the way of the user being able to control the power themselves.
| + | ==Transcript== |
| | + | {{incomplete transcript|Do NOT delete this tag too soon.}} |
| | + | Cursed Connectors #78 |
| | | | |
| − | If it forces it off, then the Outlet Denier cannot even be used. So to at least assume someone might actually use it, it must force it on. Since there is nothing else that can go into the power strip, it is not that important whether it is possible to switch it off though.
| + | [Drawing of a power strip with a rocker switch and a connector that would cover the whole power strip.] |
| − | | |
| − | ==Transcript==
| |
| − | :[To the left is a power strip with a rocker switch at the top and five outlets, and a connected wire goes from the top off to the left. To the right is the plug that should go into one of the outlets. A curved wire comes from the right and connects to the end of the connector, which is longer than a normal plug. The prongs are visible underneath where the box ends. But instead of ending there, there is a bar horizontal to the first part, which is longer than the power strip itself. There is a D shaped bar attached to this long bar, centered on the middle of the bar. If it was plugged in, the long bar would cover all the other outlets of the power strip.]
| |
| | | | |
| − | :[Text above the image:] Cursed Connectors #78
| + | The outlet denier |
| − | :[Text below the image:] The outlet denier
| |
| | | | |
| | {{comic discussion}} | | {{comic discussion}} |
| | | | |
| | [[Category: Cursed Connectors]] | | [[Category: Cursed Connectors]] |
